CRAFT RESIN Arts & Crafts resin 64 oz | Crystal Clear, Mix (1:1)
Craft Resin 64 oz Epoxy Resin for Crafts is designed for multiple resin art and DIY projects, including coasters, jewelry, keychains, trays, small molds and decorative pieces. The clear, low-viscosity two-part epoxy flows easily into molds and fine details, creating a glossy, transparent finish that showcases colors, pigments and embedded elements. With a simple 1:1 mix ratio, the 64 oz size is a practical choice for makers working on several small craft projects or who need more resin than a smaller 34 oz size.
- Made for Art Coating and Creative Pieces. This is the resin to choose for coating canvas art, flat artwork and small boards, and for coasters, trays, jewelry and small craft pieces. Pour up to 1/4 inch per layer — a flood coat over flat artwork is usually 1/16 inch, well inside that.
- Easy 1:1 Mix Ratio for Beginners. Measure equal parts resin and hardener by volume, mix slowly, and pour. The simple 1:1 ratio makes this resin easy to use for beginners while still giving experienced makers reliable results.
- Low-Bubble, Low-Viscosity Formula. The smooth, low-viscosity formula flows easily into silicone molds, corners, and fine details. It helps air bubbles rise and release more easily, making it ideal for clean, detailed craft pours.
- Cure Time & Pour Depth. You’ll have around 35 minutes of working time at 77°F. The resin reaches a hard cure in 24 hours. For best results, pour up to 1/4 inch per layer.
- Ventilation & Handling. Made for home and studio use. Always wear gloves, protect your workspace, work in a well-ventilated area, and follow the Safety Data Sheet (SDS) for full handling guidance.
- Not for Deep Pours. This resin is made for thin creative pours. For river tables, deep molds, or flower preservation blocks, use Deep Pour resin. For large tabletops or heavy protective coating, use Table Top resin.
Free US shipping on orders over $75.
Our 24/7 customer support is always here to help you.
Product specifications
Craft Resin Arts and Crafts Epoxy Resin is a 1:1 two-part epoxy system with a recommended pour depth of 1/4″, a 35-minute working time at 77 °F, and a 24-hour hard cure. These parameters make it suitable for controlled art and craft applications where clarity, surface quality, and working time are important.
For best results, follow the recommended mixing ratio, avoid pours deeper than the stated layer depth, and allow the resin to cure fully before handling, using, or exposing the finished piece to heat or food contact.
Two-part arts and crafts epoxy resin
Resin art, jewelry, coasters, trays, small molds, canvas coating, doming, keychains, charms, photo and artwork coating, small object encapsulation
Crystal clear, transparent, glass-like, high-gloss
1:1 by volume
1/4″ per layer
35 minutes at 77 °F
Hard cure 24 hours at 77 °F; full strength develops over about 21 days
70–81 °F
Up to 176 °F
Yellowing-resistant formula
Scratch resistant when fully cured
Suitable for incidental food contact once fully cured
Yes
Low odor
Store in a cool, dry place away from sunlight
12 months
All you need in one set
Compare and choose your perfect formula
1:1 by volume
1:1 by volume
2:1 by volume
1/4 inch
1/8 inch
Up to 2 inches
35 min
25 min
60 min
24 hours
36–48 hours
48–72 hours
1400 cps
3800 cps
600 cps
Resin art, jewelry, coasters, trays, small molds
Countertops, bar tops, tabletops, furniture coating
River tables, deep molds, flower preservation, large castings
Thin pours and craft coatings
Thin surface coating
Deep castings
Crystal clear, glossy, transparent
Crystal clear, glossy, protective coating
Crystal clear, transparent casting
FAQ
If you have any other question, please, visit our FAQ section or write us in Live Chat
What's the shipping and delivery timeline?
Orders typically arrive in a few days, but we advise allowing 1-3 working days for deliveries.
How much resin mix do I need?
To work out how much resin mix and therefore what Craft Resin kit you will need for your project, please visit our website: https://www.craft-resin.com/pages/epoxy-resin-calculator
Does Craft Resin yellow over time?
Craft Resin is formulated to be yellowing-resistant and helps resist yellowing over time. It is not immune to yellowing — clarity is affected by prolonged direct sunlight — and we do not describe it as non-yellowing.
How long does Arts & Crafts resin take to cure?
Craft Resin Arts & Crafts resin reaches a hard cure in 24 hours at 77°F. Full mechanical strength develops over around 21 days.
Why are my projects not curing?
Check your workspace temperature 70–81°F. Ensure resin & hardener ratio is equal by volume, mix for 3-5 minutes, and allow more time for thin or thick layers. If steps were incorrect, curing may fail, requiring a restart.
How can I prevent bubbles in my epoxy resin projects?
To avoid bubbles, keep the resin and hardener in a room at 70–81°F (below 59°F, warm the resin to 86°F before mixing), mix them slowly and steadily, pour in layers no thicker than 1/4 inch (or up to 2 inches for deep pour resin), and use a heat torch to eliminate surface bubbles.
Any question?
You can contact us through our contact page! We will be happy to assist you.
What is the mixing ratio for Arts and Crafts Resin?
Arts and Crafts Resin uses a 1:1 mix ratio. For comparison, Table Top Epoxy uses 1:1 and Deep Pour Epoxy Resin uses 2:1.
How deep can I pour Arts and Crafts Resin in one layer?
Up to 1/4 inch per layer. Table Top Epoxy is designed for 1/8 inch and Deep Pour Epoxy Resin for 2 inches.
How long is the working time for Arts and Crafts Resin?
The working time is 40 minutes. Table Top Epoxy has 25 minutes and Deep Pour Epoxy Resin has approximately 1 hour.
How long does Arts and Crafts Resin take to cure?
Arts and Crafts Resin reaches hard cure at 24 hours. Table Top Epoxy reaches hard cure in 36–48 hours and Deep Pour Epoxy Resin cures in 48–72 hours.
Craft with Confidence! Worry-Free.
If you’re not satisfied with our product, simply contact us and we’ll give you a full, 100% hassle-free refund.
You may also like
